https://detroitdieselseries.com Thu, 16 Jul 2026 05:32:44 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://detroitdieselseries.com/2026/07/detroit-diesel-60-series-ecm-ddec-iv-pn-p23519308/ https://detroitdieselseries.com/2026/07/detroit-diesel-60-series-ecm-ddec-iv-pn-p23519308/#comments Thu, 16 Jul 2026 05:32:44 +0000 https://detroitdieselseries.com/2026/07/detroit-diesel-60-series-ecm-ddec-iv-pn-p23519308/








The Detroit Diesel 60 SERIES ECM DDEC IV P/N P23519308 is an Engine Control Unit (ECU) designed for car and truck parts. This ECM has an OEM maximum amperage and terminal quantity, making it a reliable and efficient component for vehicle systems. Perfect for those looking for a high-quality replacement part for their Detroit Diesel engine, this ECM is a crucial piece of equipment for maintaining vehicle performance. All parts are working good, taken off from the accident truck.

]]> https://detroitdieselseries.com/2026/07/detroit-diesel-60-series-ecm-ddec-iv-pn-p23519308/feed/ 0 https://detroitdieselseries.com/2026/07/genuine-garrett-turbo-turbocharger-caterpillar-cat-c12-detroit-diesel-series-60/ https://detroitdieselseries.com/2026/07/genuine-garrett-turbo-turbocharger-caterpillar-cat-c12-detroit-diesel-series-60/#comments Wed, 15 Jul 2026 17:31:44 +0000 https://detroitdieselseries.com/2026/07/genuine-garrett-turbo-turbocharger-caterpillar-cat-c12-detroit-diesel-series-60/









Detroit Diesel Series 60.

]]> https://detroitdieselseries.com/2026/07/genuine-garrett-turbo-turbocharger-caterpillar-cat-c12-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2026/07/genuine-hhp-reman-detroit-diesel-series-60-14l-fuel-injector-fe4e00001-4-pin-2/ https://detroitdieselseries.com/2026/07/genuine-hhp-reman-detroit-diesel-series-60-14l-fuel-injector-fe4e00001-4-pin-2/#comments Wed, 15 Jul 2026 05:30:42 +0000 https://detroitdieselseries.com/2026/07/genuine-hhp-reman-detroit-diesel-series-60-14l-fuel-injector-fe4e00001-4-pin-2/






Highway & Heavy Parts (HHP) remanufactured electronic unit injectors, part number FE4E00001. Fits Detroit Diesel Series 60 14.0L engines (DDEC VI / E3). Important: Features 4-pin (4-prong) electrical connector-verify compatibility with your engine harness. NOS (new old stock) condition-still in factory protective plastic. Two injectors remain factory sealed; one was carefully removed for photos/verification (shown). No core charge or return required. Price is firm as listed unless “offers” enabled. Unsolicited discount requests will be ignored; repeated messaging may result in blocking. Honest mistake or fitment question? Message me first, happy to work it out!

]]> https://detroitdieselseries.com/2026/07/genuine-hhp-reman-detroit-diesel-series-60-14l-fuel-injector-fe4e00001-4-pin-2/feed/ 0 https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-rocker-arm-assembly-of-3-pieces-8929056/ https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-rocker-arm-assembly-of-3-pieces-8929056/#comments Tue, 14 Jul 2026 17:29:13 +0000 https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-rocker-arm-assembly-of-3-pieces-8929056/


Detroit diesel series 60 12.7L rocker arm assembly of 3 pieces 8929056.

]]> https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-rocker-arm-assembly-of-3-pieces-8929056/feed/ 0 https://detroitdieselseries.com/2026/07/fuel-pump-for-detroit-diesel-series-60-engine-11-1l-12-7l-14l-inline-6-cylinder/ https://detroitdieselseries.com/2026/07/fuel-pump-for-detroit-diesel-series-60-engine-11-1l-12-7l-14l-inline-6-cylinder/#comments Mon, 13 Jul 2026 17:23:43 +0000 https://detroitdieselseries.com/2026/07/fuel-pump-for-detroit-diesel-series-60-engine-11-1l-12-7l-14l-inline-6-cylinder/












We know our products. Always the correct part. New Fuel Pump Assembly. 23505245,23517845,23532981,23537686, R23537686,680350E. Type: Fuel Pump Fitment Type:Direct Replacement Placement on Vehicle:Front Material: iron. 1 x Fuel Pump. Uel pump is made of premium iron material, with high hardness, durability, and long service life. Professional Installation is Highly Recommended (No Instruction Included). Even if your car is shown in the compatibility, pls also double check the fitment details and photos before ordering. 1st at 4:30am. 1st at 5:00am. Other items you might also like. Fuel Pump For Mercedes-Benz 190E 280E 300SE 380SL 450SE 450SL 500SL 500SEC. Universal 12V Inline / External High Pressure Fuel Pump Kit GSL392 255LPH. 12V Electric Fuel Pump with 1/4 NPT Inlet and Outlet SP8132 for Oldsmobile. 2PC Fuel System Replacement Filters for Powerstroke Cummins for Duramax FS-1001. Right Fuel Pump Assembly for 05-15 Dodge Charger Challenger Magnum Chrysler 300. Low Pressure Fuel Pump for OMC Volvo Penta Mercruiser 4.3L-5.7L 3858261 18-7326. Fuel Pump Pressure Regulator for BMW E90 323i 325i 328i 330i 335i 2.5L 3.0L I6. Fuel Pump Module Assembly for Toyota Prius ZVW30 ZVW35 1.8L 10-15 7702047081.

]]> https://detroitdieselseries.com/2026/07/fuel-pump-for-detroit-diesel-series-60-engine-11-1l-12-7l-14l-inline-6-cylinder/feed/ 0 https://detroitdieselseries.com/2026/07/front-rear-crank-seal-installer-for-detroit-diesel-series-60-12-7l-14l-j-35686-b-2/ https://detroitdieselseries.com/2026/07/front-rear-crank-seal-installer-for-detroit-diesel-series-60-12-7l-14l-j-35686-b-2/#comments Mon, 13 Jul 2026 05:22:47 +0000 https://detroitdieselseries.com/2026/07/front-rear-crank-seal-installer-for-detroit-diesel-series-60-12-7l-14l-j-35686-b-2/
















30 Days FREE Return. For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Specifications: Type:Crank Seal Installer Condition: Brand New Fitment Type: Direct Replacement Material:Steel. Features: Strong compatibility: Works on the Detroit diesel series 60 and two cycle 92 engines High quality material: high quality wear-resistant steel structure, black oxidized surface treatment, durable, anti-corrosion and anti-rust. High precision and hardness for longer service life. Upgrade design – The tool is easier to use due to the simpler design, and each part is manufactured to the OE# specifications. Function: Used to install the front and back crankshaft wear sleeve and seals, eliminate the lip spot of the wear sleeve, the seal is installed correctly, without any leakage, saving you a lot of trouble in the work Prevent leakage of seals. Direct the J – 35686 – b and J – 35686 – a, is widely used in a variety of sealing and wear components, including 5, 23516969235357, 8235348, 5235835. Easier work – for installing front and rear crankshaft wear sleeves and seals. It eliminates the lip flame on the wear sleeve and properly installs the seal without leakage. Seal the outer diameter of the rubber with clean oil. Lubricate gearbox cover or flywheel housing holes with clean oil. Install two guide studs (J-35686-1) through the holes provided in the center guide assembly (J-35686-1) and into the two threaded holes of the crankshaft at 180 degrees. Tighten the guide stud. The base must be tight against the end of the crankshaft. Install the gasket on the center screw of the base. Slide the oil seal assembly over the mounting base as close to the crankshaft hub as possible. Slip the collar so that the side with the step touches the seal. Slide the mounting cup onto the guide stud and mounting base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing so that one side of the housing faces the mounting cup and install the hexagon nut on the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gearbox cover. When the inner surface of the housing is firmly against the base and gasket, the seal and sleeve are installed correctly. The tool should be removed. All our products are 100% brand new unless otherwise stated in the product description section. We only offer the highest quality parts and accessories available and we are not responsible for any illegal issues that caused by the improper usage of our products. >>you might also like. 2x Rear Stabilizer Sway Bar End Links for Acura TL 99 – 08 Honda Accord 98 – 07. Crankshaft For Toyota Tacoma 4Runner FJ Cruiser Tundra 1GR-FE 4.0 V6 1340131011. Waterproof TPE Floor Mat for Honda Accord 13-17 Cargo Trunk Liner All Weather. 4PC ABS Speed Sensor Set for Mercedes-Benz C230 C300 C350 2008-11 2045400117.

]]> https://detroitdieselseries.com/2026/07/front-rear-crank-seal-installer-for-detroit-diesel-series-60-12-7l-14l-j-35686-b-2/feed/ 0 https://detroitdieselseries.com/2026/07/2007-detroit-diesel-series-60-engine-service-overhaul-repair-workshop-manual/ https://detroitdieselseries.com/2026/07/2007-detroit-diesel-series-60-engine-service-overhaul-repair-workshop-manual/#comments Sun, 12 Jul 2026 17:21:45 +0000 https://detroitdieselseries.com/2026/07/2007-detroit-diesel-series-60-engine-service-overhaul-repair-workshop-manual/












FOR SALE IS A SERVICE MANUAL THAT IS PICTURED. 1999 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483. 2003 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483. 1987 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483. 2005 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483. 2002 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483. 1991 DETROIT DIESEL SERIES 60 ENGINE SERVICE SHOP REPAIR WORKSHOP MANUAL 6SE483.

]]> https://detroitdieselseries.com/2026/07/2007-detroit-diesel-series-60-engine-service-overhaul-repair-workshop-manual/feed/ 0 https://detroitdieselseries.com/2026/07/detroit-diesel-allison-8528885-oil-cooler-core-asm-oem-nos-53-71-92-series/ https://detroitdieselseries.com/2026/07/detroit-diesel-allison-8528885-oil-cooler-core-asm-oem-nos-53-71-92-series/#comments Sun, 12 Jul 2026 05:20:45 +0000 https://detroitdieselseries.com/2026/07/detroit-diesel-allison-8528885-oil-cooler-core-asm-oem-nos-53-71-92-series/













Genuine Detroit Diesel Allison oil cooler core assembly, part number 8528885. 16-plate stacked cooler core design used on various Detroit Diesel 2-cycle engine applications. Original OEM Detroit Diesel Allison part in factory packaging. Detroit Diesel 53 Series. Detroit Diesel 71 Series. Detroit Diesel 92 Series. Interchange / Related Numbers. 8547547 supersedes 8528885 on some applications. Fits various industrial, marine, generator, construction equipment, and heavy truck applications using Detroit Diesel engines. OEM oil cooler core assembly. Original Detroit Diesel Allison box. New old stock component with heavy outer box wear from long-term storage. Cooler itself appears unused with minor shelf marks only. Please review all photos for the most accurate view. ? Have questions or want extra pics??? Thanks for visiting Betterwithage88! Follow our store for vintage finds, rare collectibles, and sale events. Please note: if there is a box, it may show shelf/storage wear from being held in stock please inspect photos for details. If there is no box pictured, then there is no box included.

]]> https://detroitdieselseries.com/2026/07/detroit-diesel-allison-8528885-oil-cooler-core-asm-oem-nos-53-71-92-series/feed/ 0 https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-ddec-iii-valve-cover-8929139-3/ https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-ddec-iii-valve-cover-8929139-3/#comments Sat, 11 Jul 2026 17:19:42 +0000 https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-ddec-iii-valve-cover-8929139-3/



The Detroit Diesel Series 60 12.7L DDEC III Valve Cover #8929139 is a high-quality engine part manufactured by Detroit in the United States. This valve cover is specifically designed for the Detroit Diesel Series 60 engine, providing a secure and reliable seal for the engine’s valvetrain system. Made with durable materials and precision engineering, this valve cover ensures optimal performance and longevity for your vehicle or equipment.

]]> https://detroitdieselseries.com/2026/07/detroit-diesel-series-60-12-7l-ddec-iii-valve-cover-8929139-3/feed/ 0 https://detroitdieselseries.com/2026/07/kent-moore-j-6883-3-piston-ring-compressor-detroit-diesel-series-149-engines/ https://detroitdieselseries.com/2026/07/kent-moore-j-6883-3-piston-ring-compressor-detroit-diesel-series-149-engines/#comments Sat, 11 Jul 2026 05:18:44 +0000 https://detroitdieselseries.com/2026/07/kent-moore-j-6883-3-piston-ring-compressor-detroit-diesel-series-149-engines/




I’ve been having for quite a few years. I used it to three or four times probably about 10 years ago. Been sitting up in the shop for quite a few years. There are nothing wrong with it. It works perfect and thank you for looking.

]]> https://detroitdieselseries.com/2026/07/kent-moore-j-6883-3-piston-ring-compressor-detroit-diesel-series-149-engines/feed/ 0