https://detroitdieselseries.com Thu, 16 Apr 2026 13:00:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://detroitdieselseries.com/2025/11/5229405-injector-9290-detroit-diesel-92-series-new-surplus-aftermarket/ https://detroitdieselseries.com/2025/11/5229405-injector-9290-detroit-diesel-92-series-new-surplus-aftermarket/#comments Sat, 22 Nov 2025 09:03:40 +0000 https://detroitdieselseries.com/2025/11/5229405-injector-9290-detroit-diesel-92-series-new-surplus-aftermarket/







5229405 – INJECTOR 9290, Detroit diesel 92 series – New Surplus Aftermarket FAST! For more info feel free to send us a message If for any reason you are not completely satisfied with your part please let us know and we will do all we can to help.

]]> https://detroitdieselseries.com/2025/11/5229405-injector-9290-detroit-diesel-92-series-new-surplus-aftermarket/feed/ 0 https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/ https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/#comments Thu, 10 Jul 2025 03:27:47 +0000 https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/





















Tool set for Detroit Diesel 60 Series. Included Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Injector Height Gauge Kit. Application? For Detroit Series 50 and Series 60 Engines. Best choice of motor parts. Valve Tool Set for Detroit Diesel 60 Series Engine Included Injector Tool, Cam Gear Retaining Tool, and Rocker Arm Shaft Socket. For Detroit Series 50 and Series 60 Engines. 80.3mm, Series: 60, Engine: DDEC III, Year: Late 1997. 82.1mm, Series: 60. Benefit? Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues. Package Includes? 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90° angle for use in areas with restricted access. Easy to Work? Be sure the height gage seats on the machined surface with the tip in the pilot hole. Adjust the height until you can slide over it and find that slight drag. Injector Cup Remover Installers Tool. Fit for Detroit Diesel Series 60 Engine. OE Number: J-46904, J-48824. Cam Gear Retaining Tool. Suitable for Detroit Diesel Series 60 engines. Alternatives to J-35652-A, OEM M30116. For Detroit Diesel DD13 DD15 DD16. Alternative to W470589042300 W470589022300. 4.6mm – 0.1811 in and W470589022300 4.1mm – 0.1614 in. Rocker Arm Shaft Socket. For Detroit Diesel 60 Series Engine. Alternative to J-44706, Superseded From J-36003-A. 12MM 12PT 1/2 Inch Drive Extra Deep Socket. Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Please refer to your service manual for most up to date procedure. 3350, J-35652-A, J-44706, J-45947, J-46904, W470589042300. For Detroit Diesel Series 60 Engines. A Set of Crankshaft Alignment Tool. Single item or set. Please make sure your.

]]> https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/feed/ 0 https://detroitdieselseries.com/2023/05/otc-5876-injector-remover-detroit-diesel-series-60/ https://detroitdieselseries.com/2023/05/otc-5876-injector-remover-detroit-diesel-series-60/#comments Fri, 05 May 2023 18:06:09 +0000 https://detroitdieselseries.com/2023/05/otc-5876-injector-remover-detroit-diesel-series-60/


Specially designed puller to remove seated injectors from the cylinder heads of Detroit Diesel Series 60 inline 6 engines. A thrust bearing under the puller nut reduces friction during operation for smooth, easy injector removal. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “jojos_deals” and is located in this country: US. This item can be shipped to United States.

• Brand: OTC Tools & Equipment
• Warranty: Yes
• Manufacturer Part Number: 5876

]]> https://detroitdieselseries.com/2023/05/otc-5876-injector-remover-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2022/09/injector-height-gauge-tool-3350-fits-for-detroit-diesel-engine-series-5060-new/ https://detroitdieselseries.com/2022/09/injector-height-gauge-tool-3350-fits-for-detroit-diesel-engine-series-5060-new/#comments Fri, 30 Sep 2022 15:11:40 +0000 https://detroitdieselseries.com/2022/09/injector-height-gauge-tool-3350-fits-for-detroit-diesel-engine-series-5060-new/










Injector Height Gauge Tool 3350 Fits for Detroit Diesel Engine Series 50/60 new. Total new and high quality. Durable, long lifetime guaranteed. Pictures are taken by real product. A must have tool set for proper fuel injector timing! Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues. Our injector height gauges are used to properly set injector body height to the injector follower for proper fuel injector timing. Note: Be sure the height gage seats on the machined surface with the tip in the pilot hole. Adjust the height until you can slide over it and find that slight drag. The kit comes with 5 measuring blocks in sizes: 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm along with knurled handle. 80.3mm, Series: 60, Engine: DDEC III, Year: Late 1997. 82.1mm, Series: 60. The kit comes with 5 measuring blocks in sizes. 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm along with knurled handle. (except weekends & official holidays). We will be very honored to provide you with quality service. We will try our best to resolve any kind of issue. This item is in the category “eBay Motors\Automotive Tools & Supplies\Other Auto Tools & Supplies”. The seller is “auto201786″ and is located in this country: US. This item can be shipped to United States, Canada, Mexico.

• Brand: Soillar
• Manufacturer Part Number: MYQP053
• Warranty: 1 Year
• Color: Black
• Material: Steel
• Fuel Type: Diesel
• Number of Pieces: 6
• Type2: 3350 Injector Height Gauge Kit
• feature: Durability
• Type1: Injector Height Gauge
• Compatibility: Detroit Series 50 and Series 60 engines
• Single item or set: Set

]]> https://detroitdieselseries.com/2022/09/injector-height-gauge-tool-3350-fits-for-detroit-diesel-engine-series-5060-new/feed/ 0 https://detroitdieselseries.com/2021/03/injector-o-ring-seal-kit-for-detroit-series-60-50-ref-5234702-23511870-6-set/ https://detroitdieselseries.com/2021/03/injector-o-ring-seal-kit-for-detroit-series-60-50-ref-5234702-23511870-6-set/#comments Fri, 05 Mar 2021 07:31:36 +0000 http://detroitdieselseries.com/2021/03/injector-o-ring-seal-kit-for-detroit-series-60-50-ref-5234702-23511870-6-set/





PART AND FITMENT DETAILS. Item Condition: New Item Description. INJECTOR SEAL KIT DETROIT DIESEL SERIES 60 12.7L. Product Quality: Meets or exceeds O. Included with this item. 12 black shaft o-rings. 6 orange end shaft o-rings. 6 Pintle Cap protective covers. Quality Parts at Competitive Prices. The item “Injector O-Ring Seal Kit for Detroit Series 60 & 50 Ref # 5234702 23511870 6 set” is in sale since Sunday, March 4, 2018. This item is in the category “eBay Motors\Parts & Accessories\Commercial Truck Parts\Other Commercial Truck Parts”. The seller is “best-supplies” and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Country/Region of Manufacture: Italy
• Manufacturer Part Number: 2290260 / SK5230000
• Brand: STR / Detroit Diesel
• Warranty: 1 Year
• Fits: Detroit Diesel Series 60 engine

]]> https://detroitdieselseries.com/2021/03/injector-o-ring-seal-kit-for-detroit-series-60-50-ref-5234702-23511870-6-set/feed/ 0 https://detroitdieselseries.com/2021/03/injector-oring-kit-detroit-diesel-series-60-12-7l-repair-service-kit-s50-s60/ https://detroitdieselseries.com/2021/03/injector-oring-kit-detroit-diesel-series-60-12-7l-repair-service-kit-s50-s60/#comments Thu, 04 Mar 2021 19:28:36 +0000 http://detroitdieselseries.com/2021/03/injector-oring-kit-detroit-diesel-series-60-12-7l-repair-service-kit-s50-s60/





PART AND FITMENT DETAILS. Item Condition: New Item Description. INJECTOR SEAL KIT DETROIT DIESEL SERIES 60 12.7L. Product Quality: Meets or exceeds O. Included with this item. 12 black shaft o-rings. 6 orange end shaft o-rings. 6 Pintle Cap protective covers. Quality Parts at Competitive Prices. The item “INJECTOR ORING KIT DETROIT DIESEL SERIES 60 12.7L REPAIR SERVICE KIT S50 S60″ is in sale since Sunday, April 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Commercial Truck Parts\Other Commercial Truck Parts”. The seller is “best-supplies” and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Includes Other: Pintle Cap Protector x 6
• Fits: Detroit Diesel Series 60 & 50 engine
• Packaging: Bagged and Sealed from Factory
• Suitable on: DETROIT SERIES 50 / DETROIT SERIES 60
• Country/Region of Manufacture: Italy
• Manufacturer Part Number: 2290260 / SK5230000
• Brand: STR / Detroit Diesel
• Warranty: 1 Year
• Injector Ref #: 5104701 / 5150575 / 5160037

]]> https://detroitdieselseries.com/2021/03/injector-oring-kit-detroit-diesel-series-60-12-7l-repair-service-kit-s50-s60/feed/ 0 https://detroitdieselseries.com/2020/12/injector-height-gauge-kit-injector-nozzle-remover-for-detroit-diesel-60-series/ https://detroitdieselseries.com/2020/12/injector-height-gauge-kit-injector-nozzle-remover-for-detroit-diesel-60-series/#comments Fri, 18 Dec 2020 07:49:27 +0000 http://detroitdieselseries.com/2020/12/injector-height-gauge-kit-injector-nozzle-remover-for-detroit-diesel-60-series/













Great Compatibility: Works on Detroit Series 60 engine. 80.3mm: 60 DDEC-III Late 1997. 82.1mm: 60 See Service. Includes: Alternative to J-46904 J-48824. 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90° angle for use in areas with restricted access. 8Pcs 3350 Injector Height Gauge Kits + Injector Nozzle/Cup/Sleeve/Tube Remover Installer For Detroit Diesel 60 Series Engine Repalce J-46904 & J-48824 Heavy Duty Steel Black. Benefits: Works on screw-in stainless steel cups to remove or install the injector cups. Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues. Superior Quality: Advanced blackening hard steel process, durability and anti-corrosion. Ultra-precise design meets the requirement of high precision and hardness and a much longer service life. 6 x 3350 Injector Height Gauge Kits 2 x Injector Nozzle/Cup/Sleeve/Tube Remover Installer. Injector Height Gauge Kit. For Detroit Series 60 engine. 14 Flute Oil Filter Wrench Cap Removal Tool For Toyota Corolla Camry RAV4 Lexus. Oil Filter Wrench Cap Housing Tool Remover For Toyota RAV4 Camry Corolla. 64.5mm Oil Filter Wrench Cap Housing Tool For Toyota Corolla, Matrix, Prius, Scion. 74mm Steel Oil Filter Cap Wrench Socket Remover Tool for Benz Audi Toyota VW. 74mm Oil Filter Cap Wrench Socket Remover Tool for Benz, Audi, VW, BMW Motorcycle. Fuel Injector Socket Set & Injector Removal Tool Kit For 6.7L Ford Powerstroke. 3418 Fuel Injector Removal Tool Puller Kit for11-18 Ford 6.7L Powerstroke Diesel. 2Pcs/Set For Ford Power Stroke 6.7L Diesel Fuel Injector Socket Set 17mm 12Point. The item “Injector Height Gauge Kit + Injector Nozzle Remover for Detroit Diesel 60 Series” is in sale since Friday, January 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “visa-power” and is located in Walton, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: VSSHOP
• Type: Injector Height Gauge Kit
• Manufacturer Part Number: VSQP053882
• Warranty: 1 Year
• Color: Black
• Fitment Type: Direct Replacement
• Material: Steel
• Number of Pieces: 8
• Fitment: For Detroit Series 60 engine
• Country/Region of Manufacture: China

]]> https://detroitdieselseries.com/2020/12/injector-height-gauge-kit-injector-nozzle-remover-for-detroit-diesel-60-series/feed/ 0