https://detroitdieselseries.com Mon, 29 Jun 2026 04:46:33 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-4/ https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-4/#comments Sun, 15 Mar 2026 11:51:41 +0000 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-4/


1044mm length x 333mm width x 179mm height Detroit Diesel Series 60 application. Thick and durable glass filled polyester construction. Direct replacement for OE part 23522272. Detroit Diesel Series 60 Engine Application. Gasket or Seal Included. 41.10 x 13.11 x 7.05 inches. We back up our products 100%. UNSURE OF PART NUMBER? If this part number is not from your original unit, a parts book or your dealer, then please check with us before finalizing your order. Please provide your Engine Serial Number – Usually located on the Engine Valve Cover or Engine Block Tag. UNLESS YOU KNOW FOR CERTAIN THIS IS THE RIGHT PART NUMBER. Please let us know if there is any other parts you might need, thanks. We sell quality and competitively priced inframe kits and engine rebuild/overhaul kits for Cummins, Caterpillar, Detroit Diesel, International Navistar, Mack, John Deer, Allis Chalmers, Chrysler, Deutz, Komatsu, Mercedes Benz, Perkins, engines. We also have engine parts, overhauls and gaskets for any and all automotive brands. For any of your Automotive needs, year, make, model, engine specs and complete engine serial number will be needed. ISX along with the ESN(Engine Serial Number which is 8 digits long) and if possible the CPL(Critical Parts List). For Caterpillar- Engine FamilyI. 3406 along with the ESN(Engine Serial Number) and Arrangement Number. CONDITION; ITEM DESCRIPTION: We’ve done our best to reveal the material condition of the item. PHOTOS: We’re not professional photographers. Therefore colors may vary slightly from what you see on your screen and the item you receive. We’re not responsible for slight colors variations. If you wish to return the item you’ll need to do so in a traceable method and in the same condition as when you received it. Our products are warranted to be free from defects in material and manufacture, under normal use and service. Thank you for checking our post.

]]> https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-4/feed/ 0 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-3/ https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-3/#comments Thu, 12 Mar 2026 23:46:40 +0000 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-3/


1044mm length x 333mm width x 179mm height Detroit Diesel Series 60 application. Thick and durable glass filled polyester construction. Direct replacement for OE part 23522272. Detroit Diesel Series 60 Engine Application. Gasket or Seal Included. 41.10 x 13.11 x 7.05 inches. We back up our products 100%. UNSURE OF PART NUMBER? If this part number is not from your original unit, a parts book or your dealer, then please check with us before finalizing your order. Please provide your Engine Serial Number – Usually located on the Engine Valve Cover or Engine Block Tag. UNLESS YOU KNOW FOR CERTAIN THIS IS THE RIGHT PART NUMBER. Please let us know if there is any other parts you might need, thanks. We sell quality and competitively priced inframe kits and engine rebuild/overhaul kits for Cummins, Caterpillar, Detroit Diesel, International Navistar, Mack, John Deer, Allis Chalmers, Chrysler, Deutz, Komatsu, Mercedes Benz, Perkins, engines. We also have engine parts, overhauls and gaskets for any and all automotive brands. For any of your Automotive needs, year, make, model, engine specs and complete engine serial number will be needed. ISX along with the ESN(Engine Serial Number which is 8 digits long) and if possible the CPL(Critical Parts List). For Caterpillar- Engine FamilyI. 3406 along with the ESN(Engine Serial Number) and Arrangement Number. CONDITION; ITEM DESCRIPTION: We’ve done our best to reveal the material condition of the item. PHOTOS: We’re not professional photographers. Therefore colors may vary slightly from what you see on your screen and the item you receive. We’re not responsible for slight colors variations. If you wish to return the item you’ll need to do so in a traceable method and in the same condition as when you received it. Our products are warranted to be free from defects in material and manufacture, under normal use and service. Thank you for checking our post.

]]> https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-3/feed/ 0 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-2/ https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-2/#comments Sun, 08 Mar 2026 23:38:42 +0000 https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-2/


1044mm length x 333mm width x 179mm height Detroit Diesel Series 60 application. Thick and durable glass filled polyester construction. Direct replacement for OE part 23522272. Detroit Diesel Series 60 Engine Application. Gasket or Seal Included. 41.10 x 13.11 x 7.05 inches. We back up our products 100%. UNSURE OF PART NUMBER? If this part number is not from your original unit, a parts book or your dealer, then please check with us before finalizing your order. Please provide your Engine Serial Number – Usually located on the Engine Valve Cover or Engine Block Tag. UNLESS YOU KNOW FOR CERTAIN THIS IS THE RIGHT PART NUMBER. Please let us know if there is any other parts you might need, thanks. We sell quality and competitively priced inframe kits and engine rebuild/overhaul kits for Cummins, Caterpillar, Detroit Diesel, International Navistar, Mack, John Deer, Allis Chalmers, Chrysler, Deutz, Komatsu, Mercedes Benz, Perkins, engines. We also have engine parts, overhauls and gaskets for any and all automotive brands. For any of your Automotive needs, year, make, model, engine specs and complete engine serial number will be needed. ISX along with the ESN(Engine Serial Number which is 8 digits long) and if possible the CPL(Critical Parts List). For Caterpillar- Engine FamilyI. 3406 along with the ESN(Engine Serial Number) and Arrangement Number. CONDITION; ITEM DESCRIPTION: We’ve done our best to reveal the material condition of the item. PHOTOS: We’re not professional photographers. Therefore colors may vary slightly from what you see on your screen and the item you receive. We’re not responsible for slight colors variations. If you wish to return the item you’ll need to do so in a traceable method and in the same condition as when you received it. Our products are warranted to be free from defects in material and manufacture, under normal use and service. Thank you for checking our post.

]]> https://detroitdieselseries.com/2026/03/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-8929139-2/feed/ 0 https://detroitdieselseries.com/2024/01/egr-valve-pn-p23533539-series-60-detroit-diesel-12-7l/ https://detroitdieselseries.com/2024/01/egr-valve-pn-p23533539-series-60-detroit-diesel-12-7l/#comments Tue, 09 Jan 2024 18:03:26 +0000 https://detroitdieselseries.com/2024/01/egr-valve-pn-p23533539-series-60-detroit-diesel-12-7l/






Egr valve 12.7L in stock.

]]> https://detroitdieselseries.com/2024/01/egr-valve-pn-p23533539-series-60-detroit-diesel-12-7l/feed/ 0 https://detroitdieselseries.com/2023/12/valve-tool-set-for-detroit-diesel-60-series-engine-included-injector-tool/ https://detroitdieselseries.com/2023/12/valve-tool-set-for-detroit-diesel-60-series-engine-included-injector-tool/#comments Tue, 26 Dec 2023 04:44:48 +0000 https://detroitdieselseries.com/2023/12/valve-tool-set-for-detroit-diesel-60-series-engine-included-injector-tool/

















Features: Tool set for Detroit Diesel 60 Series Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge Made of high quality steel and finish Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines Descriptions.

]]> https://detroitdieselseries.com/2023/12/valve-tool-set-for-detroit-diesel-60-series-engine-included-injector-tool/feed/ 0 https://detroitdieselseries.com/2023/11/valve-cover-for-detroit-diesel-series-60-oe-23522272-8929139/ https://detroitdieselseries.com/2023/11/valve-cover-for-detroit-diesel-series-60-oe-23522272-8929139/#comments Fri, 03 Nov 2023 21:24:59 +0000 https://detroitdieselseries.com/2023/11/valve-cover-for-detroit-diesel-series-60-oe-23522272-8929139/






Valve Cover for DETROIT Diesel Series 60 OE# 23522272, 8929139.

]]> https://detroitdieselseries.com/2023/11/valve-cover-for-detroit-diesel-series-60-oe-23522272-8929139/feed/ 0 https://detroitdieselseries.com/2023/08/valve-tool-set-for-detroit-diesel-60-series-engine-3350-injector-height-gauge/ https://detroitdieselseries.com/2023/08/valve-tool-set-for-detroit-diesel-60-series-engine-3350-injector-height-gauge/#comments Mon, 07 Aug 2023 12:32:54 +0000 https://detroitdieselseries.com/2023/08/valve-tool-set-for-detroit-diesel-60-series-engine-3350-injector-height-gauge/











Valve Tool Set for Detroit Diesel 60 Series Engine, 3350 Injector Height Gauge. Valve Tool Set for Detroit Diesel 60 Series Engine Included Injector Tool, Cam Gear Retaining Tool, Crankshaft Alignment Tool and Rocker Arm Shaft Socket. Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Crankshaft Alignment Tool for Detroit Diesel 60 Series 14 L and 12.7 L Engines Replace J-45947. Engine Brake Adjustment Tool for Detroit Diesel DD13 DD15 DD16 Jake Brake Feeler Gauge Alternative to W470589042300 W470589022300 (4.6MM & 4.1MM). Crankshaft Alignment Tool Replace J-45947 for Detroit Diesel 60 Series. Cam Gear Retaining Tool J-35652-A Fits for Detroit Diesel 60 Series Alternative to OEM M30116. Injector Nozzle/Cup/Sleeve/Tube Remover&Installer for Detroit Diesel 60 Series Alternative to J-46904 & J-48824. For Detroit Diesel 60 Series Engine Rocker Arm Shaft Socket Alternative to J-44706 12MM 12PT 1/2 Inch Drive Extra Deep Socket Heavy Duty Superseded from J-36003-A. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. Idler 3 Cantilever Tool for Detroit Diesel DD13 DD15 Engine J-47487 cam. For Detroit Diesel DD13 DD15 DD16 Engine Brake Adjustment & Barring Tool &TDC. Engine Barring Tool for Detroit Diesel DD13, DD15, DD16 W470589046300 J-46392. For Detroit Diesel DD13 DD15 DD16 Injector Cup Remover /Engine Brake tool Kit. Camshaft Timing Tool for Detroit Diesel DD15 DD16 EPA07 EPA10 to # W470589104000. J-47388-A Injector Cup Nozzle Tube Remover & Installer Tool for Detroit Diesel. J-35597-A Cylinder Liner Installer Tool for Detroit Diesel 60 Series Engine 5874. Rear Crankshaft Oil Seal Tool kit W470589004300 for Detroit Diesel DD13 DD15 &16. Rocker Arm Shaft Socket for Detroit Diesel 60 Series Engine to J-44706 12MM 12PT. For Detroit Diesel 60 Series J-48824 J-46904 Injector Cup Remover Installer Tool. Engine Brake Adjustment Tool for Detroit Diesel DD13 DD15 DD16 ATCPRO2300 2PCS. Cam Gear Retaining Tool J-35652-A for Detroit Diesel 60 Series to OEM M30116. Crankshaft Alignment Tool kit for Detroit Diesel 60 Series Alternative J-45947. 3350 Injector Height Gauge Kit for Detroit Diesel Engines Series 50 60 J-39697. For Detroit Diesel DD13 DD15 Crankshaft Front Rear Seal Remover Installer Tool. Front Crankshaft Seal Remover Installer Tool for Detroit Diesel DD13 DD15 Engine. Crankshaft TDC Locating Tool J-48630 Heavy Duty for Detroit Diesel DD13 DD15. J-35686-A Front Rear Crankshaft Seal Wear Sleeve Installer for 60 Detroit Diesel. J-35641-A Cylinder Head Lift Bracket Alt. For Detroit Diesel 60 Series Engine. For Detroit Diesel DD15 Engine Camshaft Timing Tool TDC Locating Pin Engine Tool. For Detroit Diesel DD13 DD15 J-47487 & J-48630 Engine Gear Train Timing Tool. Cylinder Installer w/ Head Lift Bracket, Injector Height Tool for Detroit Diesel. High Pressure Fuel Line Socket Tool 19MM for all Detroit Diesel DD13 DD15 DD16. M30143 Cylinder Liner Puller Remover Tool for Volvo D12 D13 D16s Detroit Diesel. For Detroit Diesel DD15 DD16 Camshaft Timing Tool Kit TDC Locating Pin Tool. TDC Locating Pin Camshaft Locking Timing Pin for Detroit Diesel & Mercedes Benz.

]]> https://detroitdieselseries.com/2023/08/valve-tool-set-for-detroit-diesel-60-series-engine-3350-injector-height-gauge/feed/ 0 https://detroitdieselseries.com/2023/07/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-892913/ https://detroitdieselseries.com/2023/07/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-892913/#comments Wed, 26 Jul 2023 10:41:53 +0000 https://detroitdieselseries.com/2023/07/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-892913/


Valve Cover for DETROIT Diesel Series 60 to match OE# 23522272, 892913.

]]> https://detroitdieselseries.com/2023/07/valve-cover-for-detroit-diesel-series-60-to-match-oe-23522272-892913/feed/ 0 https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/ https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/#comments Thu, 22 Jun 2023 17:28:03 +0000 https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/




















Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket. Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. We will respond within.

]]> https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/feed/ 0 https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/ https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/#comments Thu, 30 Mar 2023 07:51:52 +0000 https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/













Valve Tool Set Injector Cam Gear Retaining Socket for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. Tool set for Detroit Diesel 60 Series. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Notic: Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. Please list your special requests color, packages, etc. We maintain high standards of excellence. Feedback is very important to us. Pls contact me first before you leave Neutral. I will do my best to solve the problem, thanks! This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Hand Tool Parts & Accessories”. The seller is “chenzj2020″ and is located in this country: US. This item can be shipped to United States.

• Brand: CHZJ
• Warranty: 2 Year
• Type: Valve Tool Set

]]> https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/feed/ 0