Detroit Diesel Series » Detroit Diesel Series

Detroit Diesel Series » Detroit Diesel Series » retaining https://detroitdieselseries.com Sun, 19 Apr 2026 13:06:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 OTC 5884 OTC Cam Gear Retaining Tool Detroit Diesel Series 60 https://detroitdieselseries.com/2026/01/otc-5884-otc-cam-gear-retaining-tool-detroit-diesel-series-60/ https://detroitdieselseries.com/2026/01/otc-5884-otc-cam-gear-retaining-tool-detroit-diesel-series-60/#comments Thu, 29 Jan 2026 23:22:38 +0000 https://detroitdieselseries.com/2026/01/otc-5884-otc-cam-gear-retaining-tool-detroit-diesel-series-60/

OTC 5884 OTC Cam Gear Retaining Tool Detroit Diesel Series 60

OTC 5884 OTC Cam Gear Retaining Tool Detroit Diesel Series 60

Features & Benefits: This tool is used to properly hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage. The tool installs into the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case. For use on Detroit Diesel Series 60.
OTC 5884 OTC Cam Gear Retaining Tool Detroit Diesel Series 60

]]> https://detroitdieselseries.com/2026/01/otc-5884-otc-cam-gear-retaining-tool-detroit-diesel-series-60/feed/ 0 For Detroit Diesel 60 Series Valve Tool Set, Injector Cam Gear Retaining Socket https://detroitdieselseries.com/2026/01/for-detroit-diesel-60-series-valve-tool-set-injector-cam-gear-retaining-socket/ https://detroitdieselseries.com/2026/01/for-detroit-diesel-60-series-valve-tool-set-injector-cam-gear-retaining-socket/#comments Sun, 18 Jan 2026 23:00:46 +0000 https://detroitdieselseries.com/2026/01/for-detroit-diesel-60-series-valve-tool-set-injector-cam-gear-retaining-socket/

For Detroit Diesel 60 Series Valve Tool Set, Injector Cam Gear Retaining Socket

]]> https://detroitdieselseries.com/2026/01/for-detroit-diesel-60-series-valve-tool-set-injector-cam-gear-retaining-socket/feed/ 0 3350 Injector & Cam Gear Retaining Tool Kit for Detroit Diesel 60 Series Engine https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/ https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/#comments Thu, 10 Jul 2025 03:27:47 +0000 https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/
3350 Injector & Cam Gear Retaining Tool Kit for Detroit Diesel 60 Series Engine

3350 Injector & Cam Gear Retaining Tool Kit for Detroit Diesel 60 Series Engine

Tool set for Detroit Diesel 60 Series. Included Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Injector Height Gauge Kit. Application? For Detroit Series 50 and Series 60 Engines. Best choice of motor parts. Valve Tool Set for Detroit Diesel 60 Series Engine Included Injector Tool, Cam Gear Retaining Tool, and Rocker Arm Shaft Socket. For Detroit Series 50 and Series 60 Engines. 80.3mm, Series: 60, Engine: DDEC III, Year: Late 1997. 82.1mm, Series: 60. Benefit? Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues. Package Includes? 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90° angle for use in areas with restricted access. Easy to Work? Be sure the height gage seats on the machined surface with the tip in the pilot hole. Adjust the height until you can slide over it and find that slight drag. Injector Cup Remover Installers Tool. Fit for Detroit Diesel Series 60 Engine. OE Number: J-46904, J-48824. Cam Gear Retaining Tool. Suitable for Detroit Diesel Series 60 engines. Alternatives to J-35652-A, OEM M30116. For Detroit Diesel DD13 DD15 DD16. Alternative to W470589042300 W470589022300. 4.6mm – 0.1811 in and W470589022300 4.1mm – 0.1614 in. Rocker Arm Shaft Socket. For Detroit Diesel 60 Series Engine. Alternative to J-44706, Superseded From J-36003-A. 12MM 12PT 1/2 Inch Drive Extra Deep Socket. Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Please refer to your service manual for most up to date procedure. 3350, J-35652-A, J-44706, J-45947, J-46904, W470589042300. For Detroit Diesel Series 60 Engines. A Set of Crankshaft Alignment Tool. Single item or set. Please make sure your.
3350 Injector & Cam Gear Retaining Tool Kit for Detroit Diesel 60 Series Engine

]]> https://detroitdieselseries.com/2025/07/3350-injector-cam-gear-retaining-tool-kit-for-detroit-diesel-60-series-engine/feed/ 0 Cam Gear Retaining Tool Detroit Diesel Series 60 https://detroitdieselseries.com/2023/12/cam-gear-retaining-tool-detroit-diesel-series-60/ https://detroitdieselseries.com/2023/12/cam-gear-retaining-tool-detroit-diesel-series-60/#comments Sun, 03 Dec 2023 23:51:33 +0000 https://detroitdieselseries.com/2023/12/cam-gear-retaining-tool-detroit-diesel-series-60/

Cam Gear Retaining Tool Detroit Diesel Series 60

Cam Gear Retaining Tool – Detroit Diesel Series 60.
Cam Gear Retaining Tool Detroit Diesel Series 60

]]> https://detroitdieselseries.com/2023/12/cam-gear-retaining-tool-detroit-diesel-series-60/feed/ 0 For Detroit Diesel 60 Series Engine Injector Tool, Cam Gear Retaining Tool https://detroitdieselseries.com/2023/08/for-detroit-diesel-60-series-engine-injector-tool-cam-gear-retaining-tool/ https://detroitdieselseries.com/2023/08/for-detroit-diesel-60-series-engine-injector-tool-cam-gear-retaining-tool/#comments Mon, 07 Aug 2023 00:31:55 +0000 https://detroitdieselseries.com/2023/08/for-detroit-diesel-60-series-engine-injector-tool-cam-gear-retaining-tool/

For Detroit Diesel 60 Series Engine Injector Tool, Cam Gear Retaining Tool

For Detroit Diesel 60 Series Engine Injector Tool, Cam Gear Retaining Tool. For Detroit Diesel 60 Series Engine. Injector Nozzle/Cup/Sleeve/Tube Remover&Installer for Detroit Diesel 60 Series Alternative to J-46904 & J-48824. Superior Quality – Advanced blackening solid steel process, durability and anti-corrosion. Ultra-precise design meets the requirement of high precision and hardness and a much longer service life. Benefit – Works on screw-in stainless steel cups to remove or install the injector cups. Easier Work – Includes four high quality rubber o-ring seals. Cam Gear Retaining Tool J-35652-A Fits for Detroit Diesel 60 Series Alternative to OEM M30116. Fitment: Suitable for Detroit Diesel Series 60 engines. Function: This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt. Great Design: The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear. Direct Replacement: Alternatives to J-35652-A. Engine Brake Adjustment Tool for Detroit Diesel DD13 DD15 DD16 Jake Brake Feeler Gauge Alternative to W470589042300 W470589022300 (4.6MM & 4.1MM). Great Compatibility – Works on Detroit Diesel DD15 & DD16 engines built before HDE0077481 & DD13 engines built before HDE0079072. Superior Quality – Advanced heavy duty steel process and black non-slip PVC coated handle, durability and anti-corrosion. Includes – W470589042300 4.6mm – 0.1811 in and W470589022300 4.1mm – 0.1614 in. Engine Rocker Arm Shaft Socket Alternative to J-44706 12MM 12PT 1/2 Inch Drive Extra Deep Socket Heavy Duty Superseded from J-36003-A. For Detroit Diesel 60 Series. Application: Detroit Diesel 60 Series Rocker Arm Shaft Socket. Replacement: Alternative to J-44706, Superseded From J-36003-A. Function: This deep-well 12mm socket is used to torque the rocker arm nut to OE specification and has a stepped outside diameter for proper clearance and access to the fastener. Premium Material: Crafted from high standard Steel for great durability and anti-corrosion, providing an unparalleled long lifespan. Crankshaft Alignment Tool Replace J-45947 for Detroit Diesel 60 Series. Application – Works on Detroit 60 Series Diesel. Function – This tool is used to ensure proper crankshaft alignment when doing camshaft timing check and service. Pin will drop into the crankshaft locating hole, placing the No. 1 cylinder at top-dead-center (TDC). Direct Replacement – Alternative to part # J-45947 both in function and performance. Applications – Works on Detroit Series 50 and Series 60 engines. Benefit – Properly set injector body height to the injector follower for proper fuel injector timing. Incorrect injector timing can cause engine power issues, poor idle quality and fuel mileage issues. Includes – 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90° angle for use in areas with restricted access. Easier Work – Be sure the height gage seats on the machined surface with the tip in the pilot hole. Adjust the height until you can slide over it and find that slight drag. Universal Cylinder Liner Puller for Mack Cummins Caterpillar Detroit Diesel. J-45876 Cylinder Pack Liner Puller Remover Tool for Detroit Diesel 60 Series. For Detroit Diesel DD15 Engine Camshaft Timing Tool TDC Locating Pin J-47487. Tool for Detroit Diesel DD13 DD15 Crankshaft Oil Seal Seal Remover Installer. Injector Cup Remover Engine Brake Adjustment tool For Detroit Diesel DD13 15 16. For Detroit Diesel DD15 DD16 Engine Camshaft Timing Tool TDC Locating Pin. Rear Crankshaft Oil Seal Remover Installer Tool for Detroit Diesel DD13 DD15 16. For Detroit Diesel DD13 DD15 Idler 3 Cantilever Crankshaft TDC Locating Tool. Carbon Scraper Tool for Detroit Diesel DD15 DD16 Engines Used with J-47386. Injector Cup Nozzle Tube Remover Installer Tool for Detroit Diesel DD13 DD15 16. Idler 3 Cantilever Tool For Detroit Diesel DD13 DD15 Engine J-47487 Gear Train. Camshaft Timing Tool Kit TDC Locating Pin Tool Kit For Detroit Diesel DD15 DD16. Cylinder Liner Puller Tool PT-6410-5 PT-6400-C for Cummins Detroit Diesel Volvo. Front Crankshaft Oil Seal Remover & Installer Tool for Detroit Diesel DD13 DD15. For Detroit Diesel Camshaft Timing Tool+TDC Locating Pin+Engine Barring Tool. J-35641-A Lift Bracket J-35996-A Rocker Arm Lifter for Detroit Diesel 60 Series. J-35686-A B Crankshaft Seal Wear Sleeve Installer Tool for Detroit Diesel 60. J-35791 Cylinder Liner Puller Remover Tool for Detroit Diesel S60 S50 Volvo D12. J-35996-A Rocker Arm Lifter Heavy Duty Tool for Detroit Diesel 50 60 Series. J-48630 Crankshaft TDC Locating Tool Heavy Duty for Detroit Diesel DD15 DD13. Camshaft Timing Tool for Detroit Diesel DD15 & DD16 EPA07 & EPA10 W470589104000. J-35641-A Cylinder Head Lift Bracket Tool for Detroit Diesel Engines 60 Series. Cam Gear Retaining Tool J-35652-A M30116 for Detroit Diesel Engines 60 Series. Engine Barring Tool for Detroit Diesel DD13 DD15, DD16 MBE J-46392 W904589046300. Engine Brake Adjustment Tools Fuel Line Socket for Detroit Diesel DD13 DD15 DD16. 19MM High Pressure Fuel Line Socket Tool J48770 for Detroit Diesel DD13 DD15 16. Crankshaft Alignment Tool Kit for Detroit Diesel 60 Series, Replace # J-45947. TDC Locating Pin Camshaft Locking Timing Pin for Detroit Diesel DD15, DD16 DD13. Engine Brake Adjustment Tool 4.6MM + 4.1MM for Detroit Diesel DD13 DD15 DD16 2PC. For Detroit Diesel 60 Series Rocker Arm Shaft Drive Extra Deep Socket Heavy Duty. Injector Nozzle Cup Sleeve Tube Remover Installer for Detroit Diesel 60 Series. 3350 Injector Height Gauge Set For Detroit Diesel Engines Series 50 60 to J-1853.
For Detroit Diesel 60 Series Engine Injector Tool, Cam Gear Retaining Tool

]]> https://detroitdieselseries.com/2023/08/for-detroit-diesel-60-series-engine-injector-tool-cam-gear-retaining-tool/feed/ 0 Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/ https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/#comments Thu, 22 Jun 2023 17:28:03 +0000 https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/

Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket

Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket. Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. We will respond within.
Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket

]]> https://detroitdieselseries.com/2023/06/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-3/feed/ 0 Valve Tool Set Injector Cam Gear Retaining Socket for Detroit Diesel 60 Series https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/ https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/#comments Thu, 30 Mar 2023 07:51:52 +0000 https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/

Valve Tool Set Injector Cam Gear Retaining Socket for Detroit Diesel 60 Series

Valve Tool Set Injector Cam Gear Retaining Socket for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. Tool set for Detroit Diesel 60 Series. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Notic: Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. Please list your special requests color, packages, etc. We maintain high standards of excellence. Feedback is very important to us. Pls contact me first before you leave Neutral. I will do my best to solve the problem, thanks! This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Hand Tool Parts & Accessories”. The seller is “chenzj2020″ and is located in this country: US. This item can be shipped to United States.

Brand: CHZJ
Warranty: 2 Year
Type: Valve Tool Set

]]> https://detroitdieselseries.com/2023/03/valve-tool-set-injector-cam-gear-retaining-socket-for-detroit-diesel-60-series/feed/ 0 Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket https://detroitdieselseries.com/2023/02/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-2/ https://detroitdieselseries.com/2023/02/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-2/#comments Thu, 02 Feb 2023 00:37:03 +0000 https://detroitdieselseries.com/2023/02/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-2/

Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Notic: Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. For Detroit Diesel Series 60 Engines. A Set of Crankshaft Alignment Tool. Single item or set. Please allow 10-30 days for international deliveries. Body Mount Bushing Kit. Volvo & Mack Flywheel Turning Tool 88800014 for D11 D13 D16 MP7 MP8 MP10 Engines. Transmission Pto Fast Cooler Manual Trans for GM Dodge NV4500 NV5600 ZF Ford. For Mercruiser Alpha 1 Gen 2 Sterndrives Transom Bellows Kit Lower Shift Cable. 3406 Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3406 3408 C-15. Rear Seal Wear Sleeve Installer Remover Tool 3164780 for Cummins ISX15 ISX12 QSX. 1068 Front+ Rear Braided Brake Lines For ATV Polaris RZR 800/S 800/4 800/XP 900. 6682 Camshaft Holding Tool Timing Cam Tension Set For Ford 3.5L 3.7L 4V Engine. 7040 Diesel Piston Ring Compressor Tool 5.4 Bore For Cummins ISX, CAT 3400 C-15. 10105 Heavy Duty Universal Joint Puller Press Removal U-Joint Tool for Cars. For Dodge Cummins Turbo Adjustable Boost Elbow Controller HX35W HX40W HY35W. Engine Valve Cover Gasket Set for GMC Chevy Silverado 4.8L 5.3L 6.0L 6.2L 7.0L. 7402 Universal Outside Thread Chaser for External Repair Tool 1-1/4″ to 5″ O. HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit For Seastar Teleflex. 115225FS Seal Kit Outboard Trim/Tilt Cap & Trim/Tilt Pin Wrench MT0006 MT0009. Diesel Injector Seat & Bore Cleaning Brush Kit 8090S Premium Stainless Steel. 22 Pcs PDR Tools Push Rods Spring Steel Kit Paintless Dent Repair Removal Tool. Outdoor Generator Waterproof Cover For Honda Generator EU2200i EU2000i. JDG476 JT30040B Crankshaft Rear Main Seal Installer For John Deere 7.6L ST-198. 7040 Piston Ring Compressor Tool + Anti-Polishing Ring For Cummins ISX 15/QSX 15. For Rotary Lift 2 post Cylinder Seal Rebuild kit for Pacoma cylinder FJ7311. Lifting Adapter YB-06820 for Yamaha 5.3 V8, 4.2 V6, F200B, F115 F425 MT0025. 4X Rear Bearing Carrier Bushing Washer Kit 5632291 7555740 For Polaris Sportsman. Seal Kit- Repair kit for Costco- Arcan dual pump plunger 3 or 3 1/4 Ton Jack. Transom Support Plate 12″ x 2″, Holes 10 for Lower Bolt Holes Replace TSP-2DP. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “cty-9420″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.

Brand: CTY-Auto
Type: Crankshaft Alignment Tool
Warranty: 1 Year
Color: Black
Material: Carbon Steel
Fitment: For Detroit Diesel Series 60 Engines
UPC: 040048975472
Model: J-45947
Package includes: A Set of Crankshaft Alignment Tool
Single item or set: Set

]]> https://detroitdieselseries.com/2023/02/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket-2/feed/ 0 For Detroit Diesel 60 Valve Tools Set, Injector Tool Cam Gear Retaining Tool Set https://detroitdieselseries.com/2023/01/for-detroit-diesel-60-valve-tools-set-injector-tool-cam-gear-retaining-tool-set/ https://detroitdieselseries.com/2023/01/for-detroit-diesel-60-valve-tools-set-injector-tool-cam-gear-retaining-tool-set/#comments Thu, 12 Jan 2023 14:17:25 +0000 https://detroitdieselseries.com/2023/01/for-detroit-diesel-60-valve-tools-set-injector-tool-cam-gear-retaining-tool-set/

For Detroit Diesel 60 Valve Tools Set, Injector Tool Cam Gear Retaining Tool Set

For Detroit Diesel 60 Valve Tool Set Injector Tool Cam Gear Retaining Tools Crankshaft Alignment Tool Rocker Arm Shaft Socket. Valve Tool Set for Detroit Diesel 60 Series Engine Included Injector Tool, Cam Gear Retaining Tool, Crankshaft Alignment Tool and Rocker Arm Shaft Socket. Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Injector Height Gauge Kit. For Detroit Series 50 and Series 60 engines. Injector Cup Remover Installers Tool. Fit for Detroit Diesel Series 60 Engine. OE Number: J-46904, J-48824. Cam Gear Retaining Tool. Suitable for Detroit Diesel Series 60 engines. Alternatives to J-35652-A, OEM M30116. For Detroit Diesel DD13 DD15 DD16. Alternative to W470589042300 W470589022300. 4.6mm – 0.1811 in and W470589022300 4.1mm – 0.1614 in. For Detroit Diesel 60 Series. Constructed from high quality iron, with black finish, providing a long service time with great durability. Rocker Arm Shaft Socket. For Detroit Diesel 60 Series Engine. Alternative to J-44706, Superseded From J-36003-A. 12MM 12PT 1/2 Inch Drive Extra Deep Socket. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “carparts_89″ and is located in this country: US. This item can be shipped to United States.

Brand: Unbranded
Type: Valve Tools Set
Warranty: 1 Year
Material: Steel
Application: for Detroit Diesel 60 Series Engine

]]> https://detroitdieselseries.com/2023/01/for-detroit-diesel-60-valve-tools-set-injector-tool-cam-gear-retaining-tool-set/feed/ 0 Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket https://detroitdieselseries.com/2022/03/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket/ https://detroitdieselseries.com/2022/03/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket/#comments Wed, 02 Mar 2022 05:16:08 +0000 https://detroitdieselseries.com/2022/03/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket/

Valve Tool Set for Detroit Diesel 60 Series Injector Cam Gear Retaining Socket. Tool set for Detroit Diesel 60 Series. Included Crankshaft alignment, Cam gear holder, 12MM 12PT 1/2 inch Rocker Arm Shaft Socket, Injector cup remover and installer and Injector height gauge. Made of high quality steel and finish. Make valve service job easy and correct, such as remove and install injector cup, rocker arm and cam device fixing bolt. 4.6mm 4.1mm Engine Brake Adjustment Tool fit for dd15 & dd16 engines. Crankshaft alignment pin is used to ensure proper crankshaft alignment, equivalent to j-45947, fit for detroit diesel 60 series. Cam gear holding tool used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt, alternatives to j-35652-a, fit for detroit diesel 60 series. 12MM 12PT 1/2 inch drive extra deep socket used to torque the rocker arm nut to oe specification and has a stepped outside diameter for proper clearance and access to the fastener, fit for detroit diesel 60 series. 4.6mm 4.1mm jake brake feeler gauge for checking the valve clearance, allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. Fit for dd15 & dd16 engines. Injector cup removal installation tool used for screw-in stainless cups to easily and promptly remove or install, fit for detroit diesel 60 series. Injector height gauge kit properly set injector body height to the injector follower for proper fuel injector timing, fit for Detroit Series 50 and Series 60 engines. 4.1+4.6 MM Engine Brake Tools Adjustment Steps. 1 Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). 2 Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. 3 When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. 4 Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. 5 Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. How to Use:(Gear Retaining Tool). Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear. Using the 3/4 in. Square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover. Using a long 3/4 in. Drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case. Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case. Removing and installing EPA07. Drain Engine Coolant before removing injector tube. Injector tubes may be damaged if excessive force is used during removal. Install injector cup removal/installation tool into injector bore. See pictures for correct tool. Aligning tool with slots in tube. Turn injector cup removal/installation tool and injector tube counter clockwise to remove. Check injector tube for cracks or defects. Paying careful attention not to score cylinder head to injector tube sealing surface, clean injector tube threads with fine wire brush. Pay strict attention to keep debris out of fuel supply line. For cleaning injector tube interior sealing surface, a chemical solvent may be used. Thoroughly clean injector bore, install new O’Ring with a silicone based lubricant into injector tube groove. Use high temperature nickel based antiseize lubricant to coat injector tube threads. Install injector tube on injector cup removal/installation tool. Using injector cup removal /installation tool install injector tube in injector bore. Tighten injector tube to torque specs. Please refer to owners manual. 26-33 ftlb loosen 180 degrees tighten 26-33 ftlb. Tip of the injector must be flush with the fire deck or sunk into the cylinder head. Ensure tube does not protrude past fire deck into cylinder. Re-install or replace shim. Ensure NEW shim is of same thickness as original one. To insure proper tube depth after fire deck has been milled a shim is used between tube and cylinder head in remanufactured cylinder heads. Note: Please refer to your service manual for most up to date procedure. We are duty off on. Thanks for your kind understanding. All of our items come with a. We insure all our items are. New and in excellent condition. In the event that you receive the item is not in the standards above, please. Best price, quality and service. Follow us and get more promotional news. About our products, pelase feel free to. We will solve all prolems for you. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Hand Tool Parts & Accessories”. The seller is “99_ll88″ and is located in this country: US. This item can be shipped to United States.

Manufacturer Part Number: LL053420506796882994
Brand: LL-Auto
Type: Valve Tool Set
Warranty: 1 Year
Country/Region of Manufacture: China

]]> https://detroitdieselseries.com/2022/03/valve-tool-set-for-detroit-diesel-60-series-injector-cam-gear-retaining-socket/feed/ 0