https://detroitdieselseries.com Thu, 04 Jun 2026 03:49:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://detroitdieselseries.com/2026/04/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-3/ https://detroitdieselseries.com/2026/04/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-3/#comments Fri, 03 Apr 2026 00:29:41 +0000 https://detroitdieselseries.com/2026/04/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-3/









COMPATIBILITY:Detroit Diesel Series 60 and two cycle 92 engines. REPLACEMENT : Direct Replacement for J-35686-B, J-35686 & J-35686-A. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. MATERIAL: High quality heavy duty steel with CNC processing and Zinc black electroplate, our product ensures excellent mechanical and physical properties — strong, corrosion resistant and durable in use. Best choice of motor parts. J-35686-B Front and Rear Wear Sleeve and Seal Installer for Detroit Diesel Series 60 and Two Cycle 92 Engines. Detroit Diesel Series 60 and two cycle 92 engines. APPLICATION & BENEFIT: This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly without leakage. 100% SATISFACTION GUARANTEE: We aim to give our customers the best products and services. Fitment: For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Feature: – For use on Detroit Diesel Series 60 and two cycle 92 – Similar to J-35686-B – Installs front crankshaft seal – Installs front crankshaft wear sleeve. Function: Install old seal p/n- 23513485 and new seal p/n- 23518355 front seals and p/n 23516969 & 23513578 rear seal and wear sleeve. J-35686-B Front and Rear Crankshaft Seal and Wear Sleeve Installer Alt. This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. Installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. For use on Detroit Diesel Series 60 and two cycle 92. Installs front crankshaft seal. Installs front crankshaft wear sleeve. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. 1 Center Guide Assembly (J-35686-1) 1 Spacer Plate 1 Installer Body (J-35686-4) 1 Thrust Bearing & J-35686-3 2 guide studs (J-35686-2) 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). J-35686-B Front and Rear Wear Sleeve Seal Installer. Single item or Kit. Detroit Diesel Series 60 and Two Cycle 92 Engines. Please list your special requests color, packages, etc. It is important that we know when your return is expected. We need this in case there are any issues during transit. Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China. We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday. We maintain high standards of excellence. Feedback is very important to us. Pls contact me first before you leave Neutral. I will do my best to solve the problem, thanks! Cat Cater pillar Tools. Chevy Chevrolet / Buick Tools. Dodge / Chrysler / Jeep. Toyota / lexus / Nissan Tools. Honda / Yamaha Tools. 6PC Valve Tappet Adjusting Tool Set for HONDA YAMAHA SUZUKI KAWASAKI MOTORCYCLES. Oil Filter Wrench Cap Removal Tool for Toyota Corolla Prius Scion Matrix 1.8L. Adjustable Boost Elbow Controller for 19942004 Dodge Cummins Turbo 2500/3500. 74mm Oil Filter Wrench Tool for Benz, VW Volkswagen, Audi, Porsche, Mazda and more. 27021 Stainless Steel Protector Skeg Guard For Mercury Mercuriser Alpha I 85-90. Skeg Guard 35-SS625 for Mercury Mariner Honda Yamaha Nissan Outboard Safe-Skeg. For Dodge Ram ISB 6.7 Holset HE300VG HE351VE Cummins Actuator Adapter 5347703H. Port Trim Ram Cylinder for Mercruiser Bravo 1 2 3 Replaces 98703A26 9B-121-02.

]]> https://detroitdieselseries.com/2026/04/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-3/feed/ 0 https://detroitdieselseries.com/2024/10/j-35686-b-frontrear-wear-sleeve-with-seal-installer-for-detroit-diesel-series-60/ https://detroitdieselseries.com/2024/10/j-35686-b-frontrear-wear-sleeve-with-seal-installer-for-detroit-diesel-series-60/#comments Thu, 24 Oct 2024 13:17:52 +0000 https://detroitdieselseries.com/2024/10/j-35686-b-frontrear-wear-sleeve-with-seal-installer-for-detroit-diesel-series-60/












J-35686-B Front&Rear Wear Sleeve w/ Seal Installer for Detroit Diesel Series 60. Detroit Diesel Series 60 and two cycle 92 engines. Direct Replacement for J-35686-B, J-35686 & J-35686-A. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. High quality heavy duty steel with CNC processing and Zinc black electroplate, our product ensures excellent mechanical and physical properties — strong, corrosion resistant and durable in use. This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly without leakage. For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Installs front crankshaft seal. Installs front crankshaft wear sleeve. Install old seal p/n- 23513485 and new seal p/n- 23518355 front seals and p/n 23516969 & 23513578 rear seal and wear sleeve. J-35686-B Front and Rear Crankshaft Seal and Wear Sleeve Installer Alt. This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. Installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. 1 Center Guide Assembly (J-35686-1). 1 Installer Body (J-35686-4). 1 Thrust Bearing & J-35686-3. 2 guide studs (J-35686-2). 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). Please list your special requests color, packages, etc. We maintain high standards of excellence. Feedback is very important to us. Pls contact me first before you leave Neutral. I will do my best to solve the problem, thanks!

]]> https://detroitdieselseries.com/2024/10/j-35686-b-frontrear-wear-sleeve-with-seal-installer-for-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2024/08/front-rear-crankshaft-seal-wear-sleeve-installer-for-detroit-diesel-series-60/ https://detroitdieselseries.com/2024/08/front-rear-crankshaft-seal-wear-sleeve-installer-for-detroit-diesel-series-60/#comments Tue, 27 Aug 2024 16:54:58 +0000 https://detroitdieselseries.com/2024/08/front-rear-crankshaft-seal-wear-sleeve-installer-for-detroit-diesel-series-60/












Notes: Please be very careful to check our photos, make sure the photo showed is same as you wanted. Thank you for your kind understanding. Great Compatibility – Works on Works on Detroit Diesel Series 60 and two Cycle 92 Engines. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 / 23513578 / 23513485 / 23518355 / 23519651. Superior Quality – Premium grade CNC heavy duty steel with black oxide finish, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life. Front & Rear Crankshaft Seal Wear Sleeve Installer For Detroit Diesel Series 60. Upgrade Design – This tool is easier to use due to a simpler design and each part is manufactured to OE# specifications. Directly replaces part #J-35686-B, J-35686 and J-35686-A. Easier Work – Used to install the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seals properly without leakage. Fitment: For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Package Include: 1x Seal Wear Sleeve Installer. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. For Detroit Diesel Series 60 and Two Cycle 92 Engines. Single item or Kit. If an item proves to be defective, please contact to have the product repaired or replaced. Messages will be replied within 24 hours. Thank you for visiting our store. We hope you are satisfied with the item and our service. Set_id=880000500F’ center center / 100% auto no-repeat; #product1_23ff370d42aefcbe8a052d6b62a16869. Image{width: 100%;} #product1_23ff370d42aefcbe8a052d6b62a16869. Title{margin: auto; width: 85%; font-size:11px; font-family: Arial; line-height: 12px; text-decoration: none; display: block; height: 2em; overflow: hidden; text-align: center; color : #191919; padding-top: 4px;} #product1_23ff370d42aefcbe8a052d6b62a16869. Item-id{font-size:11px; line-height: 12px; text-decoration: none; display: block; overflow: hidden; color : #191919} #product1_23ff370d42aefcbe8a052d6b62a16869. Item-id:before{content:’186283474985′;} #product1_23ff370d42aefcbe8a052d6b62a16869. Price{display: block; color : #bf0000; padding: 10px 0 4px; text-align: center; font-size: 16px; font-family: Arial; font-weight: 600; -webkit-text-size-adjust:none; text-decoration:none;} #product1_23ff370d42aefcbe8a052d6b62a16869. Price:before{content:’USD 18.31′;} #product1_23ff370d42aefcbe8a052d6b62a16869. Set_id=880000500F’ center center / 100% auto no-repeat; #product2_23ff370d42aefcbe8a052d6b62a16869. Image{width: 100%;} #product2_23ff370d42aefcbe8a052d6b62a16869. Title{margin: auto; width: 85%; font-size:11px; font-family: Arial; line-height: 12px; text-decoration: none; display: block; height: 2em; overflow: hidden; text-align: center; color : #191919; padding-top: 4px;} #product2_23ff370d42aefcbe8a052d6b62a16869. Title:before content:’5 Piece Brass Drift Punch Set 1/4\\.

]]> https://detroitdieselseries.com/2024/08/front-rear-crankshaft-seal-wear-sleeve-installer-for-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2023/11/j-35686-front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60/ https://detroitdieselseries.com/2023/11/j-35686-front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60/#comments Thu, 09 Nov 2023 23:12:00 +0000 https://detroitdieselseries.com/2023/11/j-35686-front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60/











For Detroit Diesel Series 60 and two Cycle 92 engines. Works on Detroit Diesel Series 60 and two Cycle 92 12.7L 14L engines. Front and Rear Crankshaft Seal and Wear Sleeve Installer. Front & Rear Crankshaft Seal & Wear Sleeve Installer Tool.

]]> https://detroitdieselseries.com/2023/11/j-35686-front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2023/09/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-2/ https://detroitdieselseries.com/2023/09/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-2/#comments Wed, 06 Sep 2023 02:54:20 +0000 https://detroitdieselseries.com/2023/09/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-2/











For Detroit Diesel Series 60 Front & Rear Seal Wear Sleeve Installer J-35686-B. COMPATIBILITY: Works on Detroit Diesel Series 60 and two cycle 92 engines. REPLACEMENT: Direct Replacement for J-35686-B, J-35686 & J-35686-A. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. MATERIAL: High quality heavy duty steel with CNC processing and Zinc black electroplate, our product ensures excellent mechanical and physical properties — strong, corrosion resistant and durable in use. APPLICATION & BENEFIT: This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly without leakage. 100% SATISFACTION GUARANTEE: We aim to give our customers the best products and services. Work on Detroit Diesel Series 60 and two cycle 92. Widely used on multiple seal & wear sleeve assemblies including 23516969 / 23513578 / 23513485 / 23518355. Durable and Strong Material. Made of heavy duty Steel, this tool kit features its high hardness and strength, not easy to deform or rust. Help to install the front and rear crankshaft wear sleeves and seals properly without any leakage, and eliminate lip flare on the wear sleeve. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. 1 Center Guide Assembly (J-35686-1). 1 Installer Body (J-35686-4). 1 Thrust Bearing & J-35686-3. 2 guide studs (J-35686-2). 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). Please make sure your.

]]> https://detroitdieselseries.com/2023/09/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b-2/feed/ 0 https://detroitdieselseries.com/2023/08/j-35686-b-front-rear-wear-seal-sleeve-installer-for-detroit-diesel-series-60/ https://detroitdieselseries.com/2023/08/j-35686-b-front-rear-wear-seal-sleeve-installer-for-detroit-diesel-series-60/#comments Tue, 08 Aug 2023 12:34:52 +0000 https://detroitdieselseries.com/2023/08/j-35686-b-front-rear-wear-seal-sleeve-installer-for-detroit-diesel-series-60/












J-35686-B Front & Rear Wear Seal Sleeve Installer For Detroit Diesel Series 60. APPLICATION: Works on Detroit Diesel Series 60, two cycle 92 engines. Used to install multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Similar to J-35686-B. Installs front crankshaft seal. Installs front crankshaft wear sleeve. Install old seal p/n- 23513485 and new seal p/n- 23518355 front seals and p/n 23516969 & 23513578 rear seal and wear sleeve. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free. Product can expose you to chemicals including Chromium (Hexavalent Compounds). Which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to California goverment website, you can search California P65Warnings. Occasionally these emails will get stuck in your spam filter so make sure to check there if you have not received your tracking. Please review the above information carefully to make sure this part fits your vehicle. For replacements, please notice us within 7 days after you receiving the item. We’re confident in the product we sell. If your item is defective or damaged. We strive to resolve any issues you may have, our ultimate goal is to keep you happy as a customer.

]]> https://detroitdieselseries.com/2023/08/j-35686-b-front-rear-wear-seal-sleeve-installer-for-detroit-diesel-series-60/feed/ 0 https://detroitdieselseries.com/2023/07/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b/ https://detroitdieselseries.com/2023/07/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b/#comments Tue, 25 Jul 2023 10:33:05 +0000 https://detroitdieselseries.com/2023/07/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b/











COMPATIBILITY: Works on Detroit Diesel Series 60 and two cycle 92 engines. REPLACEMENT: Direct Replacement for J-35686-B, J-35686 & J-35686-A. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. MATERIAL: High quality heavy duty steel with CNC processing and Zinc black electroplate, our product ensures excellent mechanical and physical properties — strong, corrosion resistant and durable in use. APPLICATION & BENEFIT: This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly without leakage. 100% SATISFACTION GUARANTEE: We aim to give our customers the best products and services. Work on Detroit Diesel Series 60 and two cycle 92. Widely used on multiple seal & wear sleeve assemblies including 23516969 / 23513578 / 23513485 / 23518355. Durable and Strong Material. Made of heavy duty Steel, this tool kit features its high hardness and strength, not easy to deform or rust. Help to install the front and rear crankshaft wear sleeves and seals properly without any leakage, and eliminate lip flare on the wear sleeve. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. 1 Center Guide Assembly (J-35686-1). 1 Installer Body (J-35686-4). 1 Thrust Bearing & J-35686-3. 2 guide studs (J-35686-2). 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10).

]]> https://detroitdieselseries.com/2023/07/for-detroit-diesel-series-60-front-rear-seal-wear-sleeve-installer-j-35686-b/feed/ 0 https://detroitdieselseries.com/2023/03/for-detroit-diesel-series-60-front-rear-wear-seal-sleeve-installer-j-35686-b/ https://detroitdieselseries.com/2023/03/for-detroit-diesel-series-60-front-rear-wear-seal-sleeve-installer-j-35686-b/#comments Sun, 19 Mar 2023 15:21:33 +0000 https://detroitdieselseries.com/2023/03/for-detroit-diesel-series-60-front-rear-wear-seal-sleeve-installer-j-35686-b/













You may also like. For Detroit Diesel Series 60 Front & Rear Wear Seal Sleeve Installer J-35686-B. Front & Rear Seal Weare Sleeve Installer. For Detroit Diesel Series 60. Condition: 100% brand new. QUALITY: Heavy duty J-35686-B Seal & Wear Sleeve Installer for Detroit. Manufactured from quality steel, using top of the line machining and measuring equipment to ensure each part is manufactured to OEM specifications. ADVANTAGE: This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. BENEFITS: This tool set installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Whats in the box. 1 x J-35686-B Seal and Wear Sleeve Installer. For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. Works on Detroit Diesel Series 60, two cycle 92 engines. Used to install multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. In the event the of the item fail due to manufacturing defects during intended use, we will replace the part by free. Some products can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to California goverment website, you can search California P65Warnings. For replacements, please notice us within 60 days after you receiving the item. We will try our best to serve you better! This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Engine Rebuild Kits”. The seller is “afautoparts” and is located in this country: US. This item can be shipped to United States.

• Country/Region of Manufacture: China
• Finish: New
• Manufacturer Part Number: AF-E867
• Type: Front & Rear Seal Weare Sleeve Installer
• Color: Black
• Material: Steel
• Fitment: For Detroit Diesel Series 60
• Other Part Number: J-35686-B
• Brand: Afauto2016
• Fitment Type: Direct Replacement
• Non-Domestic Product: No
• Manufacturer Warranty: 1 Year
• Mounting Hardware Included: Yes
• UPC: 700512603224

]]> https://detroitdieselseries.com/2023/03/for-detroit-diesel-series-60-front-rear-wear-seal-sleeve-installer-j-35686-b/feed/ 0 https://detroitdieselseries.com/2023/03/front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60-j-35686-b/ https://detroitdieselseries.com/2023/03/front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60-j-35686-b/#comments Thu, 16 Mar 2023 10:56:22 +0000 https://detroitdieselseries.com/2023/03/front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60-j-35686-b/









Fitment: For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. For use on Detroit Diesel Series 60 and two cycle 92 Direct replacement for J-35686-B, J-35686 and J-35686-A Installs front crankshaft seal Installs front crankshaft wear sleeve. Front & Rear Seal Wear Sleeve Installer For Detroit Diesel Series 60 J-35686-B. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Package Includes: Front & Rear Crankshaft Seal & Wear Sleeve Installer Tool. Any product you return must be in the same condition you received it and in the original packaging. This part is just what you need to keep your Machine in good running order. The parts that you will receive in this kit are high quality parts that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair. These Parts are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit. Please refer to the listing pictures for an accurate description of the parts included in the kit. Leaf & Coil Springs. Moto Lighting & Lamps. Motorcycle fuel Switch Valve. Brakes & Brake Parts. Clutch & Clutch Parts. Motorcycle Hand Brake Handle. Valve Cover & Gasket. Engine Coolant Recovery Tank. Engine Rocker Arm Shaft Sleeve. Spark Plug Protective Cover. Fuel Door Opener Actuator. Power Window Lift Motor. Transfer Case Gear Motor. Auto Inlet & Outlet System. Exhaust And Intake Pipes. Auto Circuit Wiring Harness. Door Power Window Switch. Mass Air Flow Sensor. Throttle Position Sensor (TPS). ABS Wheel Speed Sensor. Inner Door Panel Handle. Seat Belts & Parts. Air Conditioning & Heat. For Coleman CT200U Trail 200 Mini 196cc Bike Throttle Hand Grips Cable Clamp Kit. Vent Visor Window Deflector Guard for Dodge Ram 1500/2500/3500 Quad Cab 02-09. 100 Pcs 8mm Car Hole Plastic Rivets Fastener Fender Bumper Push Pin Clip USA. Universal Motorcycle 1 Handlebar Hydraulic Brake Clutch Lever & Master Cylinder. Bench Seat Cup Holder Insert Drink Replacement For GMC Colorado Canyon 2004-12. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “skyup2018″ and is located in this country: US. This item can be shipped to United States.

• Brand: skyup2018
• Manufacturer Part Number: SU859096KU
• Type: Crank Seal Installer
• Warranty: 1 Year
• Custom Bundle: No

]]> https://detroitdieselseries.com/2023/03/front-rear-seal-wear-sleeve-installer-for-detroit-diesel-series-60-j-35686-b/feed/ 0 https://detroitdieselseries.com/2023/03/j-35686-b-crankshaft-front-rear-seal-wear-sleeve-for-detroit-diesel-series-60/ https://detroitdieselseries.com/2023/03/j-35686-b-crankshaft-front-rear-seal-wear-sleeve-for-detroit-diesel-series-60/#comments Sat, 04 Mar 2023 20:52:29 +0000 https://detroitdieselseries.com/2023/03/j-35686-b-crankshaft-front-rear-seal-wear-sleeve-for-detroit-diesel-series-60/














Fittment:Fits for Detroit Diesel Series 60 and two Cycle 92 engines. Help workers do their jobs better. Material:Features top high quality CNC solid steel construction with a slick black finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time. Function: Used to install the front and rear crankshaft wear sleeves and seals, eliminating lip flare on the wear sleeve and installing the seals properly without any leakage, which saves you a lot of trouble during work. Best choice of motor parts. J-35686-B Crankshaft Front & Rear Seal Wear Sleeve Installer for Detroit Diesel Series 60 and Two Cycle 92 Engines. Detroit Diesel Series 60 and two Cycle 92 engines. Features top high quality CNC solid steel construction with a slick black finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time. Used to install the front and rear crankshaft wear sleeves and seals, eliminating lip flare on the wear sleeve and installing the seals properly without any leakage, which saves you a lot of trouble during work. Alternative to J-35686 & J-35686-A & #J-35686-B, widely used on multiple seal & wear sleeve assemblies including 23516969, 23513578, 23513485, 23518355. This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. 1 Center Guide Assembly (J-35686-1). 1 Installer Body (J-35686-4). 1 Thrust Bearing & J-35686-3. 2 guide studs (J-35686-2). 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). Front & Rear Seal Weare Sleeve Installer. J-35686-A/B, 23516969, 23513578, 23513485, 23518355, J-35686. For Detroit Diesel Series 60 and Two Cycle 92 Engines. If return is needed, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Feedback, we will try our best to resolve any problem and make you satisfied. Thank you for your understanding. Our office hours is as below. 9:00 a. To 6:00 p. (GMT +8) of Monday to Friday – 9:00 a. To 1:00 p. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) We apologize for the late reply during the holidays. Car & Truck Parts. Ford Parts & Tools. Cummins Parts & Tools. Dana Parts & Tools. Cat Caterpillar Parts & Tools. Volvo / Mack Parts & Tools. Dodge / Chrysler / Jeep Tools. Detroit Diesel Parts & Tools. GM Parts & Tools. 64.5mm Oil Filter Wrench Housing for Lexus Toyota Scion 6/8 cylinder cartridge. 86mm 16 Flute Oil Filter Wrench Tool Cartridge Housing Cap For BMW Volvo Vehicle. New 74mm 14 Flute Oil Filter Wrench Caps for Audi Mercedes Porsche Volkswagen VW. 64mm Oil Filter Wrench Housing Cap for Toyota 2.7-3.5L RAV4 Highlander Venza. Oil Filter Aluminum Cup Wrench Housing Cap For Toyota Lexus Scion 4 Cylinder L01. Trim Tilt Sender Sensor sending unit for Volvo Penta DPS-A DPS-B SX-A 21484383. Crank Pin Kit Compatible with All Gen 3, 4, & 5 Series Engines Fit for LS1/2/3. ST-4 Safety Pop Off Valve Pressure Relief Valve Replace for Cummins 3559097. Seal Replacement Rebuild Kit for Hein Werner 1-1/2 Ton WS Floor Jack (16PCS). This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Engine Rebuild Kits”. The seller is “lee.crusades” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Dominican Republic, El Salvador.

• Brand: LEE-Auto
• Manufacturer Warranty: 1 Year
• Type: Front & Rear Seal Weare Sleeve Installer
• Interchange Part Number: J-35686-A/B, 23516969, 23513578, 23513485, 23518355, J-35686
• Compatible: For Detroit Diesel Series 60 and Two Cycle 92 Engines
• Material: Steel

]]> https://detroitdieselseries.com/2023/03/j-35686-b-crankshaft-front-rear-seal-wear-sleeve-for-detroit-diesel-series-60/feed/ 0