Each part is manufactured to OEM specifications. Fit for Detroit Diesel 60 Series engines, Replace for J-35597-A and 5874. Installer Plate, Forcing Screw, Bridge Assembly, Locknut, 5/8, Thrust Bearing. After inserting the bushing into the cylinder block, connect the installation tool with three cylinder head bolts. After tightening the drive screw, the mounting plate firmly presses the cylinder liner into the engine block until it is properly seated. Premium grade CNC machined heavy duty steel with black anodized, durability, anti-corrosion and anti-rust, high precision and hardness to provide a much longer service life. Slide the cylinder kit assembly into the cylinder block noting the position of the connecting rod to ensure the rod is assembled to the same position as it was when removed. Push by hand until resistance is felt. Install cylinder liner installer (J35597A) over the kit to be installed. Note: It is necessary to leave the cylinder kit installation tool in place until after the liner protrusion is measured. Thread three cylinder head bolts through the tool and into a head bolt hole, so that the round shoe of the tool is centered over the liner. Alternately tighten the three bolts until they are tight. Note: It is not necessary to torque the bolts. Turn the threaded center bolt in a clockwise direction. As the round shoe of the tool reaches the liner, ensure that the shoe is properly positioned into the cylinder liner. Note: Use care for proper rod positioning during installation. Continue turning the bolt until the liner bottoms in the cylinder counterbore. Apply a tightening torque of 60 N·m (44 lb·ft) to the installation tool center bolt. Install a dial indicator sled gage. Measure the distance from the top of the liner flange to the top of the block. Remove the cylinder liner tool. Absolutely Fast and Safe! The United States package usually takes about 2-4 days to reach you. The actual time depends on the distance between the destination and the warehouse and the schedule of the post office. International package usually takes about 7-20 days to reach you. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. Your understanding will be highly appreciated! The item “For Detroit Diesel 60 Series 14L 12.7L Cylinder Liner Installer J-35597-A 5874″ is in sale since Wednesday, October 20, 2021. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “desieltoolsonline” and is located in Rialto, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan.
- Type: Cylinder Liner Installer
- Manufacturer Part Number: EC – J-35597-A/5874
- Brand: E-cowlboy
- Warranty: 1 Year