J-35686 Front & Rear Seal Wear Sleeve Installer Fit For Detroit Diesel Series 60. Works on Detroit Diesel Series 60 and two Cycle 92 engines. Used to install the front and rear crankshaft wear sleeves and seals, eliminating lip flare on the wear sleeve and installing the seals properly without any leakage, which saves you a lot of trouble during work. Features top high quality CNC solid steel construction with a slick black finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time. Alternative to J-35686 & J-35686-A & #J-35686-B, widely used on multiple seal & wear sleeve assemblies including 23516969, 23513578, 23513485, 23518355. Install the oil sleeve as follows. Install the two guide studs, J 35686-2, through the holes provided in the base, J 35686-1 and into two of the tapped holes in the crankshaft, 180° apart. Tighten the guide studs using the appropriate wrench on the flats of the studs. The base must be tight against the end of the crankshaft. For rear crankshaft oil seal installations only, install spacer J 35686-11, to the center screw of the base. Install the rear housing and adapter ring with seal and sleeve assembly in place on the guide studs. Install the thrust bearing tool with the case side toward the installer housing. Install the hex nut to the center screw of the base. Tighten the hex nut by hand until all the slack is taken up. Use a ratchet and socket to tighten the hex nut, and install the wear sleeve to the crankshaft and the oil seal to the flywheel housing and/or gear case cover. When the inside surface of the housing is seated against the base (or spacers on rear oil seal installation), the seal and sleeve are properly positioned and installed. Front & Rear Crankshaft Seal & Wear Sleeve Installer Tool. No Claim will be accept after 60 days. Good communication is helpful for both of us to resolve any problems and issues. We maintain high standards of excellence. Feedback is very important to us. Your kind support will be highly appreciated by us and keep us moving forward! This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “vimi-93″ and is located in this country: US. This item can be shipped to United States.
- Brand: VMSHOP
- Manufacturer Part Number: VMVGN0931
- Type: Front & Rear Crankshaft Seal & Wear Sleeve Installer Too
- Warranty: 1 Year
- Fitment: for Detroit Diesel Series 60 and two Cycle 92 engines.
- Color: Black
- Feature 1: CNC solid steel construction with a slick black finish
- Feature 2: Durable and anti corrosion