Cylinder Liner Installer Replaces DD60 & J-35597-A & 5874 Fits for Detroit Diesel 60 Series Engines. Perfectly fits for Detroit Diesel 60 Series engines. Alternative to OEM part number J-35597-A and 5874. Specifically designed to easily and correctly install the cylinder liners without damage, saving your time and energy. Simply attach the installer tool with three cylinder head bolts to after inserting the liner into the cylinder block. As the drive screw is tightened, the installer plate presses the cylinder liner firmly into the engine block until it’s properly seated. Made from quality & high strength carbon steel, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure long-term reliable service. Designed to easily & quickly install cylinder liners for detroit diesel 60 series engines. High efficiency, Works way better than a block of wood and a hammer. Made from highest quality carbon steel. Prevent corrosion and rust. Impact resistance, sturdy and durable. Ensures long-term reliable service. Simply attach the installer tool using three cylinder head bolts after inserting liner into the cylinder block. As the drive screw is tightened the installer plate presses the cylinder liner firmly into the engine block until it’s properly seated. Slide the cylinder kit assembly into the cylinder block noting the position of the connecting rod to ensure the rod is assembled to the same position as it was when removed. Push by hand until resistance is felt. Install cylinder liner installer (J-35597-A) over the kit to be installed. Note: It is necessary to leave the cylinder kit installation tool in place until after the liner protrusion is measured. Thread three cylinder head bolts through the tool and into a head bolt hole, so that the round shoe of the tool is centered over the liner. Alternately tighten the three bolts until they are tight. Note: It is not necessary to torque the bolts. Turn the threaded center bolt in a clockwise direction. As the round shoe of the tool reaches the liner, ensure that the shoe is properly positioned into the cylinder liner. Note: Use care for proper rod positioning during installation. Continue turning the bolt until the liner bottoms in the cylinder counterbore. Apply a tightening torque of 60 N·m (44 lb·ft) to the installation tool center bolt. Install a dial indicator sled gage. Measure the distance from the top of the liner flange to the top of the block. Remove the cylinder liner tool. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “chen_98auto” and is located in this country: US. This item can be shipped to United States.
- Set or Single Item: Set
- Fitment: for Detroit Diesel 60 Series Engines
- Replacement: DD60 & J-35597-A & 5874
- Material: Steel
- Type: Cylinder Liner Installer
- Brand: Unbranded
- Warranty: 1 Year