Work for Detroit Diesel Series 60 Two Cycle 92 12.7L 14L Engine. This J-35686-B Tool Set is used to install the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seals properly. Direct replacement for J-35686-B, J-35686 and J-35686-A. Utilized on multiple oil seals and wear sleeve assemblies including 23516969, 23513578, 23513485 and 23518355. All components are made of High Standard Carbon Steel with Black Finish, Great Strength and Durability, Anti-Corrosion &No Deformation. Used to installs the front and rear crank wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly to prevent leakage. Alternative to J-35686 & J-35686-A & J-35686-B. Front and Rear Crankshaft Seal and Wear Sleeve Installer. Works on Detroit Diesel Series 60 and two Cycle 92 12.7L 14L engines. Used on multiple seals & wear sleeve assemblies including. Install the oil sleeve as follows. Install the two guide studs, J 35686-2, through the holes provided in the base, J 35686-1 and into two of the tapped holes in the crankshaft, 180° apart. Tighten the guide studs using the appropriate wrench on the flats of the studs. The base must be tight against the end of the crankshaft. For rear crankshaft oil seal installations only, install spacer J 35686-11, to the center screw of the base. Install the rear housing and adapter ring with seal and sleeve assembly in place on the guide studs. Install the thrust bearing tool with the case side toward the installer housing. Install the hex nut to the center screw of the base. Tighten the hex nut by hand until all the slack is taken up. Use a ratchet and socket to tighten the hex nut, and install the wear sleeve to the crankshaft and the oil seal to the flywheel housing and/or gear case cover. When the inside surface of the housing is seated against the base (or spacers on rear oil seal installation), the seal and sleeve are properly positioned and installed. We will try our best to solve your problem. Please allow 10-30 days for international deliveries. It is important that we know when your return is expected. We need this in case there are any issues during transit. Good communication is helpful for both of us to resolve any problems and issues. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “opallinternational” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Brand: Unbranded
- UPC: 0641197090308