J-35686-B Front & Rear Seal Weare Sleeve Installer Fits Detroit Diesel Series 60. Detroit Diesel Series 60 and two cycle 92 engines. Direct Replacement for J-35686-B, J-35686 & J-35686-A. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355. High quality heavy duty steel with CNC processing and Zinc black electroplate, our product ensures excellent mechanical and physical properties — strong, corrosion resistant and durable in use. This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly without leakage. We aim to give our customers the best products and services. For use on Detroit Diesel Series 60 and two cycle 92. Use on seal # 23516969 23513578 23513485 23518355. For use on Detroit Diesel Series 60 and two cycle 92 – Similar to J-35686-B – Installs front crankshaft seal – Installs front crankshaft wear sleeve. Install old seal p/n- 23513485 and new seal p/n- 23518355 front seals and p/n 23516969 & 23513578 rear seal and wear sleeve. J-35686-B Front and Rear Crankshaft Seal and Wear Sleeve Installer Alt. This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. Installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. Installs front crankshaft seal. Installs front crankshaft wear sleeve. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Install two guide studs (J-35686-2) through the holes provided in the center guide assembly (J-35686-1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. 1 Center Guide Assembly (J-35686-1) 1 Spacer Plate 1 Installer Body (J-35686-4) 1 Thrust Bearing & J-35686-3 2 guide studs (J-35686-2) 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). No Claim will be accept after 60 days. Good communication is helpful for both of us to resolve any problems and issues. Due to the long transit time, the items may be damaged during transportation. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “nipysaha” and is located in this country: US. This item can be shipped to United States.
- Country/Region of Manufacture: China
- Brand: Unbranded
- Type: J-35686-B Front and Rear Wear Sleeve Seal Installer
- Warranty: 1 Year
- Application: Detroit Diesel Series 60 and Two Cycle 92 Engines
- Material: Steel
- Surface Finish: Polished
- Single item or Kit: Kit
- Number of pieces: 2
- Color: Black