For Detroit Diesel Series 60 12.7L 14L Front Rear Crank Seal Installer J-35686-B. Fits for Detroit Diesel Series 60 and two Cycle 92 Engines. Used for a variety of sealing and wear-resistant sleeve components including 23516969, 23513578, 23513485, 23518355. Replace for factory part number: J-35686-B, J-35686 and J-35686-A. Used to install front and rear crankshaft wear sleeves and seals. It eliminates the lip flare on the wear sleeve, and correctly installs the seal to solve the leakage problem. Made of high quality carbon steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant for a long-term and reliable performance. Front & Rear Crankshaft Seal & Wear Sleeve Installer J-35686-B. Professional Front & Rear Crankshaft Seal & Wear Sleeve Installer Tool Set. This Installer Tool Set will be an Indispensable helper when install front and rear crankshaft wear sleeves and seals. Help to eliminates the lip flare on the wear sleeve, and correctly installs the seal to solve the leakage problem. Works on Detroit Diesel Series 60 and two Cycle 92 Engines. Used on multiple Seal & Wear Sleeve Assemblies. Including 23516969 / 23513578 / 23513485 / 23518355 / 23519651. Heavy duty J-35686-B Seal & Wear Sleeve Installer for Detroit. This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools. This tool set installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. Manufactured from quality steel, using top of the line machining and measuring equipment to ensure each part is manufactured to OEM specifications. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil. Failure to lubricate the outside of the seal and the inside of the bore prior to installation may damage seal causing seal to leak. Install two guide studs (J-35686-2, part of tool set J-35686-B) through the holes provided in the center guide assembly (J-35686-1, part of tool set J-35686-B) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs using the appropriate wrench on the flats of the studs. The base must be tight against the end of the crankshaft. Install the spacers to the center screw of the base. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base. Lubricate the center screw of the base with extreme pressure lubricant (J-23444-A, part of tool set J-41329). Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base. Finger tighten the hex nut until snug. Install a ratchet and socket onto the hex nut. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Measure the face squareness of the outside diameter of the crankshaft seal using a runout gage installed on the crankshaft. If the total indicator reading is more then 0.762 mm 0.030 in. The seal must be removed and a new seal installed. 1 Center Guide Assembly (J-35686-1) 1 Spacer Plate 1 Installer Body (J-35686-4) 1 Thrust Bearing & J-35686-3 2 guide studs (J-35686-2) 2 Crankshaft Seal Installer Spacer (J-35686-20 / J-35686-10). Is correct before you pay, cause it. After placing an order. Is very important to us. If you have any problems with our items or services, please feel free to. We will do our best to solve any problems and provide you with the best customer services. We will respond within. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “intercars8″ and is located in this country: US. This item can be shipped to United States.
- Brand: Unbranded
- Type: J-35686-B Front and Rear Wear Sleeve Seal Installer
- Warranty: 1 Year
- Color: Black
- Material: Steel
- Surface Finish: Polished
- Number of pieces: 2
- Application: Detroit Diesel Series 60 and Two Cycle 92 Engines
- Single item or Kit: Kit